We handle ring resizing, chain and clasp repairs, earring replacements, pearl re-stringing, rhodium plating, cleaning, costume jewellery repairs, and intricate restorations.

Although all kinds of jewellery can become worn over time, rings are far more likely to become in need of repair.

This is often seen in bands which have become very thin or claws which have been worn away. Thin bands need to be replaced with new quarter / half shanks and worn-out claws need to be either retipped or rebuilt.

We have carried out thousands of these types of repairs over the years so you can be confident we will make your rings as good as new.  

Prices for ring sizing depends on 3 factors, ring type, the metal type and the amount of work required. We offer a same day express or standard ( 3 to 5 working days ) ring sizing service. We can also replace the shank or band if it is broken, weak or worn out. 

Yes, however certain eternity ring styles can be difficult to resize due to their design and construction. Click here for a deep dive.

Ring Removal Service – We can cut off and remove rings that are trapped on your finger. Whether this is an emergency, or they are simply too tight we are happy to assist. It usually takes around 10 to 15 minutes to remove a stubborn ring. Of course, the removed rings can be soldered, re-sized, and refinished to be worn again.

Yes, we can supply and set most gemstone types, sizes and colour - additionally we we ensure that the settings are secure and repair if necessary.

Completion time depends on the complexity of work, availability of materials/stones, and the current workshop load. Ring sizing is normally completed within 3 days. Please note if you can send us a photo of your piece, it would help estimate the time required. Mail us at studio@abbevilleau.com or WhatsApp / Text to 07703 697983

Every job is individually priced depending on complexity and materials. For a faster estimate, please email or WhatsApp us a photo of your piece.

Yes. We can design a completely new piece or restyle an existing item to suit your taste. We’ll consult with you through every stage of the process.

Yes. We are one of the few workshops that accept costume jewellery repairs. Please read our notes on the subject.

Until the middle of the twentieth century, there was no agreed-upon standard by which diamonds could be judged. The Gemological Institute of America created the first globally accepted standard for describing diamonds: Colour, Clarity, Cut, and Carat Weight. Today, the 4Cs of Diamond Quality is the universal method for assessing the quality of any diamond, anywhere in the world.

An 8-cut diamond (also called an old-cut diamond) is a style of diamond cut with only 8 facets on the crown (top) and 8 facets on the pavilion (bottom), plus the table and culet—making 17 or 18 facets total, compared to the 57–58 facets of a modern brilliant cut. - Click for more detail.

The Mohs scale (or Mohs Hardness Scale) is a system used to measure the scratch resistance of minerals and materials. See our Gemstones page

Yes. We have extensive expertise in diamonds, sapphires, emeralds, rubies, and many other stones, both natural and lab-grown.

Lab grown diamonds ( and other gemstones ) have surged in popularity over the last few years - This may help you decide

Yes. Our Gemstone Guides explain cut, clarity, colour, carat weight, certification, and setting styles. We also provide personal advice during consultations.

When you hold a piece of gold, you’re holding the ashes of stars that lived and died long before our Sun was even born. Would you like to know more?

Gold-plated jewellery is made by coating a base metal (often brass, copper, or silver) with a very thin layer of gold, usually via electroplating. The Typical thickness of plating is : 0.1 – 2.5 microns (that’s thinner than a human hair!) The gold is not solid, it’s a surface finish only.

All our bespoke pieces come with a guarantee of precious metal content via the Goldsmiths Company.

The hallmark indicates:
Sponsor’s / maker’s mark (who submitted the piece)
Fineness mark (purity in parts per thousand)
Assay Office mark (which assay office tested & marked it)

Hallmarking is legally required in the UK for many precious metal items above a certain weight. The hallmark gives confidence in the metal quality and helps future jewellers identify the metal purity when doing repairs.

Rhodium is a rare and precious element that can be 10 to 25 times more expensive than gold. Rhodium is a member of the platinum group of metals and is silver-hued, highly reflective and does not tarnish or corrode. It is harder than gold and is highly durable. Its principally used in conjunction with White Gold pieces.

jewellery chains can wear out over time, depending on the material, construction, and how often they’re worn. Here’s how and why it happens:

Yes, we can supply a wide variety of types, sizes and materials.

Yes. We provide deep cleaning, polishing, and rhodium plating services to restore your jewellery’s brilliance.

Please note that not all materials are safe for ultrasonic cleaning: soft, porous or treated stones (e.g. opals, pearls, emeralds, turquoise) can be damaged and thus require cleaning by hand. Contact us for more details.

Store items separately to avoid scratches, avoid harsh chemicals, and clean gently with a soft cloth. For specialist advice, contact us.

Appointments are recommended for consultations and bespoke services. Drop-off and collection can also be arranged by appointment.

You can reach us by phone/text at 07703 697983 or by email at studio@abbevilleau.com

Abbeville AU is a fine jewellery workshop in Clapham Common, London. We specialise in jewellery repairs, resizing, heirloom restorations, restyling, and bespoke creations.

We are based in Clapham Common, London. Drop-off, collection, and consultations are available by appointment, including weekends and after-hours.

Yes. We offer a 15% discount for NHS staff, social care workers, blue light services, and the armed forces.

Completion time depends on the complexity of work, availability of materials/stones, and the current workshop load. Ring sizing is normally completed within 3 days. Please note if you can send us a photo of your piece, it would help estimate the time required. Mail us at studio@abbevilleau.com or WhatsApp / Text to 07703 697983